SPINN CW.01 | The protective wrap for your gear

Protect your valuable gear – perfectly simple.
The SPINN CW.01 is a completely self-adhesive protective wrap for all devices that deserve special care.

Photo, travel, outdoor – there is so much equipment that deserves better protection on your trips… You don´t want to be super careful, you don´t have lots of space and time? Well, basically it’s super easy…

With its snug fit, its easy adaptability and the three available sizes, the SPINN CW.01 protective wrap simply fits everything: from glasses to your camera equipment and even a full size laptop or tripod.

No matter what you want to pack with the SPINN CW.01 – its adhesive force will hold – under almost any load. In this video, you will get an impression of how strongly the SPINN CW.01 encloses even heavy objects.

Lenses, monitors or glasses… The CW.01 is an ideal cleaning cloth for your device. With its soft structure and the large surface area, it gently absorbs all residues on glass and plastic surfaces.

The SPINN CW.01 protective wrap is tried and tested. Beginning this year we gave the final version to over 200 photographers all over the world for evaluation and asked them for their opinion.

We offer each size of the SPINN CW.01 separately, or the whole as a set. You can choose from these rewards:

  •  Size S, 28x28cm (11×11″)
  •  Size M, 38x38cm (15×15″)
  •  Size L, 48x48cm (19×19″)
  •  SET of size S, size M & size L

Need more than one? After selecting an item you can add further CW.01 protective wraps in any size and any quantity as ADD-ON right in the following order step. After the campaign, we will ask you for your shipping address.

Wrapping is easy: Simply place your device in the center of your CW.01 protective wrap and fold all sides to the center of the wrap. Done!

Size S fits for: Camera lenses up to 80 mm diameter and 130 mm length, filters, cell phones, glasses, hard drives, USB-cables and chargers

Size M is a real workhorse – it fits well for: Mirrorless cameras with 24-100 lenses, single lenses up to 100mm diameter and 230mm length, iPads up to 10.5″, boom boxes and binoculars

Size L fits perfectly for: DSLRs with 24-105 lenses and larger, single lenses up to 120 mm diameter and 340 mm length, tripods up to 390 mm x 80 mm, 13″ and 15″ notebooks

With the SPINN CW.01 you are able to create a clean workspace for your equipment outdoors. And after you have done your job, you just simply shake out your wrap and safely store everything again.

Sustainability combined with added environmental benefits – that’s how we try to make our products. As far as we know, the CW.01 is so far the only protective cloth on the market that is manufactured from recycled raw materials. Together with you, we can make an impact. That’s why we’re supporting a reforestation program in collaboration with Eden Projects for all SPINN product launches.


The SPINN CW.01 protective wrap is available in three sizes:

  •  Size S, 28x28cm (11×11″)
  •  Size M, 38x38cm (15×15″)
  •  Size L, 48x48cm (19×19″)

Material: 100% recycled polyester /// Color: outside black, inside grey /// Grammage: 650g/sm /// Washable – Just use cold water and a neutral detergent. (Do not use washing machine, tumble dryer, iron or hair dryer) /// Not designed to be waterproof. /// Packing: dustproof in thin polybag with instruction manual.

Where was this idea born?

Of course you know hook & loop tapes from countless applications. But a soft large-area fabric that also adheres completely to itself? In orthopedics, similar materials have been around for a long time. We have translated this principle together with a well-reputed manufacturer into a soft, firm and protective material.

Status of our project.

The CW.01 is the third innovation in the field of camera accessories, which we present here on Kickstarter, and under our brands SPINN and FLECTR we have already worked successfully with over 40,000 backers in recent years. All items shown in this campaign are from a pre-production with the exact characteristics of the final items – promised.

Kai Wiehagen, head of R&D

Our fulfillment schedule.

Now that we have spent almost a year accurately preparing our new launch, we can give you a reliable preview of the fulfillment:

  • 22. June 2022: start of this campaign
  • 25. July 2022: intended start of manufacturing
  • 12. August 2022: end of campaign
  • 17. August 2022: address-survey
  • 26. August 2022: funds from Kickstarter
  • 19. September 2022: end of manufacturing & quality control

Shipment (outgoing): September 2022

After the campaign has ended we will process everything quickly and professionally. You will receive an address survey via Backerkit.com to the deposited e-mail. This survey just takes a minute, ensures proper shipment and includes the choice of your rewards and add-ons. Together with POST.NL and DHL we offer a proven and well-priced solution for world-wide shipment. Your rewards will be sent as parcel – insured & traceable. Please keep in mind that you may be responsible for customs charges if required by your country for importing goods.